Hello everyone I posted earlier about flight systems.
Now I am going to talk about my first scale build that I am doing or now is done. It’s a Roban G-jive Hughes MD 500E 600 size fuselage conversion kit. When I started it they recommended a phoenix tech mechanics for or you can use Align so that is what I started with and it didn’t fit the Align Trex 600 nitro.
Then I found that my Hirobo sceadu...
Hello everyone I posted earlier about flight systems.
Now I am going to talk about my first scale build that I am doing or now is done. It’s a Roban G-jive Hughes MD 500E 600 size fuselage conversion kit. When I started it they recommended a phoenix tech mechanics for or you can use Align so that is what I started with and it didn’t fit the Align Trex 600 nitro.
Then I found that my Hirobo sceadu shuttle fit good. Also a nitro engine. Then I had some issues with it. Then decided I wanted to change it to a electric Align trex 600 that was donated to me and it would not fit.
Bye the way they are flybar. Before I fitted it into the fuselage I wanted to change it to a four bladed head and go with the micro Beast gyro fly system then I found out it would not fit. So I decided to go back to the Trex 600 nitro. Got it to fit then it had issues. I got another Align DFC electric Trex 600 wouldn’t fit.
So I decided to get the phoenix tech ESP 600. Now remember that I got a DFC four bladed head for it. Now I need the main shaft for the DFC head they will not fit or work on the non DFC helicopter. At the ones that come with the DFC four bladed head. The Align and Phoenix tech have a lot in common or you can use parts from one to another. I know this is a lot to say but I had to do a lot of modifications to my build.