Danny D.
Mechanics for Vario R22 1:4
How People Feel About This Post9 pilots reacted
InformsFascinatesInspiresEntertains
Vario
R22 1:4
Not in anyone's hangar yet
Add to My Hangar
Vario R22 fuselage improvements
How People Feel About This Post7 pilots reacted
InformsFascinatesInspiresEntertains
Mark S.
Vario Day 2023 R22
Check out this very nice 1/4 Vario R22 built and flown by pilot Sammy saenen
Kue S.
Flying in high winds are just a part of it.
Need help. Have a 900 size Vario R22. It flys great but am having a problem. Burning up tail rotor servos. On the third one now and at this point it wont last long. After a 7 minute flight the servo is hot enough you can blister your finger (if you could hold it on it long enough) . Shorten the flight time to 5 minutes not much difference, still hot. The cyclic servos are just fine. What we...
Need help. Have a 900 size Vario R22. It flys great but am having a problem. Burning up tail rotor servos. On the third one now and at this point it wont last long. After a 7 minute flight the servo is hot enough you can blister your finger (if you could hold it on it long enough) . Shorten the flight time to 5 minutes not much difference, still hot. The cyclic servos are just fine. What we have done so far in trying to fix the problem. Linkage operates freely. Checked the voltage coming out of the FBL ( same as the cyclic ones) it is within specs. Servo is a HV up to 8.4v. Double checked the programing in FBL. it is set at 760 pulse and 500 frequency.( servo specs are 760 pulse and 560 freguency but Axon Fbl only goes to 500) Have run out of what to check or do next. I know I can't keep replacing servo at 2 or 3 flights,
Stefan R.
Some small items before I will start my next bigger project. I have now a patrol can and the landing spot lights for the Robinson R22. In scale 1:3.5 some LED lights from Innoflying will fit. Other scales needs to work out if there is a request.