VSpeak and Futaba 32MZ Is there someone that can speak to the compatibility of...
Thomas D.
VSpeak and Futaba 32MZ
Is there someone that can speak to the compatibility of the VSpeak, Jakadofsky and Futaba 32MZ?
I am struggling to get the sensors to register.
Futaba 32MZ
JetCat V10 on Futaba Sensor setup
Slot 8 per the readout of Jakadofsky interface
ID 3500 on both VSpeak and 32MZ
I did ping AeroPanda, no response yet.
7 Comments
Have you reached out to Volker directly?
Not yet, that’s my next step.
I messaged you
Thanks, just emailed them. Will follow up with post.
All resolved! Volker was most helpful. I was confused that I needed to “register” the VSpeak, however that is not necessary when using “Futaba V10” in VSpeak. Confirm in settings Slot 8 and ID 3500 and the same in the 32MZ. It was more simple than I thought.
Thanks Michael for the direction.
Hello, I will also install the VSpeak of Volker (excellent product) because in my case the ECU V12 with its tiny telemetry cable going to SBUS2 is giving sometimes random peak values on any of the Jetcat sensors (V12.79 and 3.11 T18SZ). Can't configure high temp alarm per example as false alerts. Didn't had this before with firmware V12.64.
Great news, Tom! This post will be helpful to others as well!