Welcome HeliStorm members!! The new RCPilot.com has everything you had at HeliStorm but it's better! Now, AI figures out how to catalog your posts; you just sign off on it. Plus, you can shotgun share your posts to FB if you want!
This is the very scale turbine cover for the 1/4 Vario Lama combined with a Jakadowski turbine. The pictures show also the Vario exhaust end pipe. The prototype will be printed soon and installed and tested in real. If everything runs well I will offer it in my shop in around 4 weeks. The inside of the turbine cover body will be painted with a head reflected lacquer which is already tested by the...
This is the very scale turbine cover for the 1/4 Vario Lama combined with a Jakadowski turbine. The pictures show also the Vario exhaust end pipe. The prototype will be printed soon and installed and tested in real. If everything runs well I will offer it in my shop in around 4 weeks. The inside of the turbine cover body will be painted with a head reflected lacquer which is already tested by the Heli-Factory. The turbine cover for the Heli-Factory Alouette II will follow soon.
Assembly turbine dummy kit for a 1/4 scale Alouette II and some more additional parts. The rubber hoses are still in the printer or will be measured by the customer after the first assembly of all parts but are also part of the kit.
Today we had a try-on at SCALE PRINT. the turbine cover for the Vario Lama with a Jakadowsky turbine. Some small adjustments need to be done but at least everything fits well. One straight Festo connector needs to be exchanged with a 90° connector. The 3D printed rubber pipes which are included in the set were not installed today. Available in some days by www.scale-print.de
For the Lama, the side cargo basket is now available as a kit. All parts are printed in plastic and weigh 29g without wire mesh. The dimensions can be shortened as desired in all directions.
The turbine cover for the Vario Lama in combination with a Jakadowsky 5000Pro and a Vario end pipe has successfully approved the heat test. We burned 2 liter of Kerosin which created an exhaust heat of 410°C and only 24°C on the outside of the 3D printed cover. The connection pipe on the exhaust end pipe gets only hand warm so here is also no problem. The inside of the cover has been painted with...
The turbine cover for the Vario Lama in combination with a Jakadowsky 5000Pro and a Vario end pipe has successfully approved the heat test. We burned 2 liter of Kerosin which created an exhaust heat of 410°C and only 24°C on the outside of the 3D printed cover. The connection pipe on the exhaust end pipe gets only hand warm so here is also no problem. The inside of the cover has been painted with a heat reflected lacquer and than covered with a 4-5mm self gluing glass fiber Mat. Now i will start to sell this assembly set which includes the whole cover the small and the big oil reservoir tanks, the air filter of the heat exchanger the rotor shaft cover, break plate and saddle, all 3mm aluminium supports, the glas fiber mat, the head resistant lacquer, mesh in front of the air-in slots, the oil divider, all screws which are necessary and all 3D printed rubber pipes.
This morning I routed a template to thermoform the air-in hood on the side window from the Lama which you will find in near future in my Shop. www.scale-print.de
Stefan R.
