Butch W.
VH-92A “Polyphia” Book 3.
How People Feel About This Post6 pilots reacted
InformsFascinatesInspiresEntertains
Scale Detailing
Cockpits & Interiors
Rotor Live Meeting at Iffezheim
Greetings from Rotor Live
Uwe B.How to build an animated pilot
How People Feel About This Post7 pilots reacted
InformsFascinatesInspiresEntertains
Vario 700 MD500E cockpit and scale parts
A ton of scale parts designed and made for the Vario 700 MD500E. In order to make room for a full cockpit, a set of custom cut CF sideframes is made.
How People Feel About This Post6 pilots reacted
InformsFascinatesInspiresEntertains
Cobra cockpit
High detail Cobra cockpit made of 75 individual parts. I've designed 2 variations that fit Len Mount and Vario Cobras.
Michael H.Wessex
Wessex is almost done!
How People Feel About This Post8 pilots reacted
InformsFascinatesInspiresEntertains
Wiring under the Cockpit-floor and the cockpit is completed!
Here are some videos showing the functionality of the Cockpit.
The pilot reproduces the commands given to the helicopter.
The Arduino is used to control the control panel lights and you can be controlled directly from the radio.
Currently the LEDs light up randomly.
The next step is to read the battery voltage and indicate the charge...
Wiring under the Cockpit-floor and the cockpit is completed!
Here are some videos showing the functionality of the Cockpit.
The pilot reproduces the commands given to the helicopter.
The Arduino is used to control the control panel lights and you can be controlled directly from the radio.
Currently the LEDs light up randomly.
The next step is to read the battery voltage and indicate the charge with the green, yellow, red LEDs
How People Feel About This Post8 pilots reacted
InformsFascinatesInspiresEntertains
Another step in the construction of the Cockpit
How People Feel About This Post3 pilots reacted
InformsFascinatesInspiresEntertains
HeliworkshopVario 1/4 scale Bell 47G3
Check out this beautiful bell 47 for sale in market place
Today I finished my trade fair model. An interior for a Vario Bell 429 on a scale of 1:5. You can probably see that I've been working with luxury interiors for the last 30 years in my previous job 🙂
The individual components can of course also be purchased separately.
www.scale-print.de
New in the program from today is the interior and equipment for the rear section of a rescue helicopter (in this case an H145 from Vario scale 1:5 in real scale 1:6). As always, all cushions are printed from rubber (TPU) by SCALE PRINT.
www.scale-print.de
Today I finally finished the work. Business Interior for the Vario Bell 429 in 1:5 scale.
www.scale-print.de
After I took a scan from the Vario Bell 429 on Saturday at Heli-Factory I have started to design the cockpit. The customer would like to have the business version including 5 seats in the back. To get it 100% scale the frames which are running in length direction needs to be positioned a little bit closer.
www.scale-print.de
I have just completed the first cockpit for the 1:4 Jet Ranger. This is exactly tailored to the Vario model. For sure it will be availble in any other scale.
www.scale-print.de
Here I constructed a bubble window for the Vario AS350 for a nice customer and then deep-drawn it myself. I converted a domestic waterworks (cut out the membrane and screwed on a vacuum meter) and connected a small vacuum pump. I quickly cut the thermoforming box out of multiplex and screwed it together. I then warm the clamped thermoforming material in the oven and then quickly place it over the...
Here I constructed a bubble window for the Vario AS350 for a nice customer and then deep-drawn it myself. I converted a domestic waterworks (cut out the membrane and screwed on a vacuum meter) and connected a small vacuum pump. I quickly cut the thermoforming box out of multiplex and screwed it together. I then warm the clamped thermoforming material in the oven and then quickly place it over the thermoforming model. Open the ball valve and after a few attempts, it works :-). If someone needs such a bubble window for his model, he only has to send me the door for scanning and of course dig a little deeper into his pocket as the construction including scanning is a considerable amount of time.
www.scale-print.de
How People Feel About This Post
Nobody has reacted yet.
This is the result of the last 2,5 weeks.
Cockpits for: Alouette III 1/6,7, Alouette III 1/6, Lama 1/5, Bell UH-1D 1/6, EC 120 1/4, EC 130 1/4,5, A109 1/4,8. All cockpits are of course illuminated.
www.scale-print.de
How People Feel About This Post
Nobody has reacted yet.
www.scale-print.de
New in the program from today is the cockpit of the Alouette III. Of course available in any scale.
www.scale-print.de
First Test of my animated Cockpit
How People Feel About This Post
Nobody has reacted yet.
Today I finished the cockpit for Volker Jung's K-Max 1200. Tomorrow it goes to the post office and if everything works out, we can see the nice piece next weekend in Belgium at the Francis Scalemeeting.
www.scale-print.de
The cockpit for Volker Jung's K-Max 1200 is now also almost finished. Only the ceiling panel is missing.
www.scale-print.de
Today I finished the cockpit for the Blue Thunder from Heli-Factory. This time in scale 1/4. Unfortunately only the keyboard in front of the screen on the side table is missing.
www.scale-print.de
Cockpit for a Blue Thunder in scale 1/7.5. Ready for shipping.
www.scale-print.de
How People Feel About This Post
Nobody has reacted yet.
Today I have a new cockpit from the military version of the BO 105 in scale 1:4
www.scale-print.de
Cockpit for the EC 130 from Heli-Factory in scale 1/5.7. All 7 seats will fit into the heli :-). Looks a little bit like in a cinema.
www.scale-print.de
Vario H.Vario UH-1D 1:6 (Huey) Build Gallery
Mark S.
Baumann Helicopter
Check out some of the awesome super detailed scale parts, mechanics and tail rotors from Baumann Helicopter. They come in various sizes and will be available in the US very soon. https://www.modellhubschrauber.ch/e-vendo.php?shop=helibaumanne&...
How People Feel About This Post
Nobody has reacted yet.
The first two cockpits for a BK 117 in 1:7,6 scale (for www.scale-helikopter-service.com ) now finished. Instruments are backlit as in almost all of my cockpits and the seat pads are printed in rubber (TPU) using the laser sintering process.
www.scale-print.de
I still have one for today. Lama Cockpit 1:4 also with backlit instruments.
www.scale-print.de
Available from today in my store. Cockpit and accessories for the BK 117. Designed in 1:7.6 scale but as with all my items, of course available in any other printable scale on request.
www.scale-print.de