Need Advice in All

I made the switch to Jeti and going thru the learning curve. No doubt I am totally impressed, a whole new world of capabilities with Jeti. The Bell and Lama are converted, waiting on some decent flying to “adjust” the Axon (read Michael and Sandy’s article along with a ton of Sandy’s help). Also, a lot of YouTube learning at Harry Curzon’s pages plus others. I’ve looked at a few other sites, but thought I would post here first. Q: Where is the best place on this site to start a Q&A?

I am setting up a 3X unit and was wondering if there is an option to remove the servo connection from the 3X unit and have the gyro work in a serial output mode. some of these digital servos are power hungry and the central box is made to deal with that.(bavarian demon even makes a big deal about this by requiring dual power leads with jeti in serial-in mode) but if there is no option to leave the servos plugged into the central box (or receiver for that matter) what is the point of having the central box or the bigger power management RX's? it seems that the fixed wing version of the gyro has that option explained in the manual, but I see no reference in the heli-version manuals. there seems to be a black hole in data on the internet for this information. am i stuck just using the servo outputs in this unit?