The turbine cover for the Vario Lama in combination with a Jakadowsky 5000Pro and a Vario end pipe has successfully approved the heat test. We burned 2 liter of Kerosin which created an exhaust heat of 410°C and only 24°C on the outside of the 3D printed cover. The connection pipe on the exhaust end pipe gets only hand warm so here is also no problem. The inside of the cover has been painted with...
The turbine cover for the Vario Lama in combination with a Jakadowsky 5000Pro and a Vario end pipe has successfully approved the heat test. We burned 2 liter of Kerosin which created an exhaust heat of 410°C and only 24°C on the outside of the 3D printed cover. The connection pipe on the exhaust end pipe gets only hand warm so here is also no problem. The inside of the cover has been painted with a heat reflected lacquer and than covered with a 4-5mm self gluing glass fiber Mat. Now i will start to sell this assembly set which includes the whole cover the small and the big oil reservoir tanks, the air filter of the heat exchanger the rotor shaft cover, break plate and saddle, all 3mm aluminium supports, the glas fiber mat, the head resistant lacquer, mesh in front of the air-in slots, the oil divider, all screws which are necessary and all 3D printed rubber pipes.
SCALE PRINTTurbinenattrappe Alouette III (Bausatz)Diese Turbinenattrappe ist speziell für die Alouette III angepasst worden. Sie unterscheidet sich gegenüber der Alouette II Turbine durch das Endstück des Abgasrohres, ein dicker Gummischlauch auf der linken Seite und die Position der Luftansaugstutzen. Die Halterung sind im Preis enthalten müssen a
Stefan R.
