My Heli-Factory Turbine BO-105
From Beginning to the End
The Beginning
I have avoided this article because of the heartache involved in losing such a fantastic model. The idea to build this BO-105 began back in 2024 at my home in Tennessee with Bernd Bremer ( one of the owners of HELI-FACTORY ), Chuck Birt ( the U.S. Distributor for HELI-FACTORY at that time ) and myself sitting at the table discussing my next project. We decided to build this model with a Jakadofsky 7000 for power which would be my first turbine powered helicopter. I started my search for the right paint scheme and came across a BO-105CBS in a beautiful "stars and stripes" scheme that belonged to Scott Urschel. Scott was doing the aerobatic circuit with his 105 doing a spectacular aerobatic routine. That was what I wanted this 105 to represent. HELI-FACTORY was already producing a BO-105CB so Bernd "streached" one of those into a CBS version. Bernd and Georg Maier started the fitting and assembly of the mechanics into the fuselage. Francis Paduwat ( known worldwide for exceptional painting ) agreed to do the custom paint scheme and we were "on the path" of a great looking and great flying 1/4 scale BO-105.
Sandy and I headed to Phoenix, Arizona to visit Scott and Gina Urschel to gather pictures for Francis to apply his magic and details for Bernd to apply his. Scott and Gina welcomed us to their home which was located on a private airport and of course he had an immaculate hanger attached to his home where he kept this beautiful BO-105. After gathering the necessay pictures and returning home I sent them to Bernd.
A few weeks later Chuck Birt and his wife Wendy, Sandy and I headed to Germany to attend Francis Paduwat's Fun-Fly in Belgium. I got to meet Francis, Georg and the rest of the Heli-Factory Team and to see MY BO-105 being built. It was more beautiful than I expected and to see the end result of the work of Bernd, Georg and Francis is hard to describe. I couldn't wait to get home to accept the upcoming delivery. Then disaster struck !!
The first shipment would include the 105 and Bernd's personal EC-145. When the shipment arrived in Maryville, TN which is about 35 miles from my home I received a call from the shipper that the crate had been severely damaged and the models destroyed. Back to Germany for Heli-Factory to inspect the damage. Both models were damaged but easily repaired. After a few more weeks it was again crated for another journey to Tennessee. This trip was uneventful and the BO-105 finally made it safely.
Cockpit and Pilot
I had to install the electronics, final Installation of the mechanics and assemble, paint and detail the cockpit and pilot. I used Spektrum A6350 Ultra High torque servos, Spektrum A10410T redundant telemetry receiver, Bavarian 3X, and Unilight.
The cockpit and accessories are a product of SCALE-PRINT, the pilot came from TailoredPilots. I tried to keep it as realistic as possible and ended up changing the flight suit to blue and painted the flight helmet in red/white/blue to match the 105 colors.
Flying and the "flame out"
Bernd, Georg, Stefan, Heiko and Volker came to attend my Fun-Fly and I had a house full of "Heli-Factory Help". We all had a designated job and the results were a flying BO-105 for my event. Stefan put on quite a show doing aerobatics with the 105. I had a lot of flying ahead of me to get familiar with doing aerobatics with the 105. The first video is my first flight with the model after a final trim flight by Stefan to set it up for Mode 2. I knew right away it flew perfectly. After a few trips to the club field I was getting very comfortable with the flight characteristics of this 55 pound model doing loops, rolls and back flips.
The last flight on the 105 was after refueling and ended with a turbine "shutdown" due to fuel starvation. There is an inline valve that you have to open to add fuel, well, I forgot to close that valve and when I lifted off and was in a hurry for that "one last flight of the day" I didn't spend any time hovering and headed to the far end of the property so I could get plenty of airspeed to try a loop followed by a roll. I was well past the tree-line that borders the field and the header tank ran out of fuel and that Jakadofsky 7000 got very quite ( last video ) . Guys, my last engine failure before retirement was over Sabine, TX in a 206 and I can honestly tell you the sound of that Jakadofsky was EXACTLY the same sound I heard when that Allison flamed out at 800 feet, lol
I knew the 105 was not going to be able to clear that tree line and reach the field so I did a "blind auto". I guessed pretty good on the pitch pull as the 105 was sitting on the skids when we found it about twenty feet from the trees in a ditch. The fuselage suffered most of the impact and was pretty much destroyed. The tail boom was intact, no damage to the rotor system, and the turbine was still in "cool down" upon our arrival. The turbine and all mechanics went back to Germany for inspection which passed with flying colors, I don't even think the main shaft was bent, lol. I had no intentions of building a third BO-105 so I headed in another direction and built the HELI-FACTORY Bell 205 into Air America.
I will ALWAYS have great memories of the way that HELI-FACTORY BO-105 flew but "life goes on" lol. If you fly long enough you will more than likely have an unpleasant event, but that's just "modeling", lol































































1 Comment
Thank you for sharing. Beautiful model always sad to hear it didn’t survive. Would love to hear of it being rebuilt one day.