1/6 Animatronic MD500E Pilot doing cargo hoist work
1st Motion range test
I've been wanting to adapt my A.D.A.M. animatronic figure to the heli cockpit for a while now. An opportunity came up recently through a customer, who wants to go beyond the conventional 2-axis head rotation offerings. These small motion ranges are usually not visible from a distance. You need large body movements if you want them noticeable. Initial testing to mimic pilot behavior doing cargo hoist work is promising. The next test is to free up his left arm and have him lean forward to adjust IP/overhead switches- very visible motion ranges. Leaving the door off will further accentuate these motions within the MD500E's large greenhouse.
Adding 2 more motion sequences
There are now 3 motion sequences: 1) Adjust overhead switches, 2) Hoist bucket work behavior and 3) Tweaking knobs and switches on the instrument panel. The big challenge was to have his left hand reliably grab the collective stick after every sequence. As you can see, it works out nicely. Next is to provide user control to activate the sequences using the TX's 3-position switch.
A regret is the failed attempt to route his shoulder safety belt through the back channel using a rubber band retract system. Unfortunately the tension force is too great for the servos to overcome reliably, constantly burning up servos.
Some may point out pilot-in-command should be seated on the left in an MD500. I'm unable to implement that level of realism due to my mechanical constraints- one hand on cyclic and the other free to poke at switches. Left seater will require his left hand to traverse diagonally to touch the IP.
Doubling the pleasure
Copilot/Shooter is added, bringing the total number of actuators up to 18. Some tweaking is still needed: 1) Refine some motion segments, 2) Get matching uniform color, 3) Let user control the engine spool up/shutdown sequence.
I was told the cyclic stick can be removed for such a mission, leaving only the short stem that can still be used to control flight should the main pilot get incapacitated. This turned out perfect for my use case, otherwise the full stick will be in the way of all the gun movements.