Back to Feed
Outline & Mechanics

Mechanics

Steve A. Need Advice

How would you fix this alignment issue?

I am currently building my second Roban 800 size heli, a AS365 Coast Guard. Following the instructions I drilled the tail mounting holes, glued in the pem nuts, and life was good. Now I am installing the mechanics and when they are bolted in place, the tail assembly does not line up with the front fuse half, or the mounting holes. I see only two ways to fix, raise the front of the mechanics as...

How People Feel About This Post
View all 12 answers

She looks good. I used seven to mount my tail section.

Sign in to answer

AH-1Z upgrades and Maintenance.

How People Feel About Chapter 31 pilot reacted
View all 2 comments
Butch W.United StatesChapter 1

Thomas, Very good point. I have always held the belief that you helis talk to you. If the stab or skids begins to shake, a strange noise, the collective is a touch higher that normal in a hover, maybe its time to land and have a look at things. Things such as this could be anything from a main rotor shaft bearing, a failed main rotor grip thrust bearing cage, and in one recent case on Comanche, a main gear tooth that was cracked yet still attached. B

Sign in to comment

Rotorflight

Hi, I am currently building a Roban bell 429 in 700 size. I’m currently trying to setup rotorflight, and get everything dialed in. But I’m having a hell of a time, I originally planned to use a spirit 3. But it was non operational when I received it. So I decided to use a flydragon I had, is anybody possibly willing to share their rotorflight settings if you happen to also use rotorflight in a...

How People Feel About This Post

There are tons of resources for Rotorflight out there, and the setup guide on the website does a great job of helping you with initial setup. Where are you getting hung up?

Sharing your generic Rotorflight settings is typically not very helpful - there are a couple hundred settings to go through, and many will need to be set for your specific setup.

Sign in to comment

Black Betty, inspired by the Bell 360 Invictus

How People Feel About Chapter 20
View all 36 comments

Your work has yet to begin man. just saying.

B

Sign in to comment

Vario Hughes 500C 1/5th scale

RCPilotVario Hughes 500C 1/5th ScaleWanting my models to look a little different from all the others was my goal with this Vario 500C. Mechanics and Electronics I wanted to use the Vario 1002/40 mechanics converted to electric, utilizing the Benzine clutch

Check out Jon's Hughes 500C article. Very instructive whether or not you are building this particular model!

How People Feel About This Post3 pilots reacted

Goosky E7

I was lucky enough to get an early production version with the 10T pinion. I relocated the packs and use a pair of 3300 batteries for 7 minutes at 7.5kg and a head speed of 1100 rpm. A low kV motor is recommended like the Egodrift 4230EC-370kV. Stock 630mm look like symmetrical and fly great ONCE balanced. The mechanics fit perfectly well inside the frp. The fuselage is built for a tail belt...

How People Feel About This Post4 pilots reacted
View all 3 comments

From the Kraft and Logictrol beginnings in the '60's and '70's, I always dreamt of getting one but I could not afford it then. I bought my first one in 1987, it was a Century 7. Futaba was in the hay with theirs with poor ergonomics but JR's was perfect. Over the years I upgraded to PCM 9 and then custom made PC10sX. It's so natural for flying helis but not at all for 3D and they vanished. For me it's enjoying rc or no rc. So with the help of Roger Forgues, in 2014 I created my first FrSky single stick. And built one for each FrSky update and now use an X20RS my latest conversion. I also designed a conversion for my TX16S II which works perfectly. The MKIII will be done next winter. Flying scale with single stick is heaven and the reason I keep flying at 75. But I do fly mode II when I teach others.

Sign in to comment

HELI-FACTORY Bell 205 "Air America"

I have been an avid admirer of Heli-Factory models for several years as well as a very big fan of the Bell HUEY. I have several thousand hours in helicopter aviation and had the opportunity to fly the Huey and have been "hooked" ever since. With Heli-Factory introducing the 1/5th scale Bell 205 last year I had to have one and it is one of my most prized models. I have an acquaintance who flew...

How People Feel About This Post5 pilots reacted

Periodic Maintenance N178MT

How People Feel About Chapter 35 pilots reacted
View all 9 comments

I do not remember when the last time that bolt was replaced. This bolt, P/N 053, is the bolt that is supplied with rotor head P/N 705/30 and is also used on the tail grips to hold the tail blades. The description has G-12 so would guess its a pretty strong bolt. The shank is not threaded so is the correct bolt to use in this application.

I wonder if the slop in the follower was the root cause over time. The follower have been replaced with P/N 68/20 which is ball raced opposed to the pins installed on the original driver. The bolt will be inspected and or replaced on a regular basis moving forward.

UIH,

B

Sign in to comment

Vario Chinook XL

How People Feel About Chapter 204 pilots reacted

600 size SA-341 from a Gilbert Escalier fuselage

Goblin 570 driving a modified Vario fenestron with a belt. SpinBlades 600, 8 minutes on 3500 packs. It flies surprisingly well in the wind. Egodrift, YGE 105 governed by iKon2 FBUS connection TDMX. Radio is X20RS, full telemetry and integration.

(When it looks easy, it's not)

How People Feel About This Post3 pilots reacted

That is a classic look!!

Sign in to comment

H145 T2 1/6

First flight this year and a perfect flyer. The 10 blade fenestron is driven by a an HDT-3M belt. Head speed 1050 rpm, 9kg, 7 minutes on 3800 packs, that's the clip and the link is at 1100 rpm.
It is a perfect candidate for orientation flying. I fly scale speed in any direction like the full size.

How People Feel About This Post3 pilots reacted

Roban Bell 429 (700)

How People Feel About Chapter 95 pilots reacted
View all 22 comments

Hello Cletus, the flying weight is 18.7lbs (8.5kg) with the 3 batteries, 2x5000 6S, that i use for everything (motor, servos, received, etc), and 1x1,500 3S that is use for the lights system.
Head speed 1,250rpm, i tried to lower it to the 1,100 suggested but at 1,250 it feel more comfortable, for me, in the way the heli respond. Fly time 8min but the batteries still have 55-60% charge after landing. I hope this help you with your project.

Sign in to comment

Mechanics for Vario R22 1:4

How People Feel About Chapter 134 pilots reacted

Cobra Project

How People Feel About Chapter 147 pilots reacted
View all 53 comments

All gears are Vario stock products.

Sign in to comment
Richard W.United States Need Advice

Hey everyone, hope all is good…
I’m working on VARIO CH-53. I’m stumped on where to put electronics ( ECU, batteries etc. there is only the cargo door, no other door access. I could use some ideas. Or pics of your setup?
Thanks for any help!
🚁🤪

How People Feel About This Post2 pilots reacted
View all 5 answers

Picture in chapter 1 of chapter stories

Sign in to answer

Vario Bell 429 Build, a pictorial journey

How People Feel About Chapter 176 pilots reacted

Roban 800 Huey UH-1D German SAR

Getting the mechanics into the Roban 800 fuse has been an enjoyable process, but now I have to think about wiring the lighting which DOES NOT seem like a small job! Need to get my pilots to work for me while I'm not home (LOL).

Anyone have any tips for Changing out the pre-painted roof glass that appears to be incorrectly tinted? Just replace it or should I try and remove the paint somehow?

How People Feel About This Post5 pilots reacted

Tail angle gearbox overhaul

What is the overhaul frequency of your tail angle gearbox with metal bevel gear?

Pick One0 votes
Signing in takes just a code. The results show once you vote.Sign In to Vote
Never - Find not needed, access not easy, etc.
When needed - Signs like more mesh, vibration, noise, etc.
Yearly - Check, clean and re-lubricate
Rare - I know lasts a long time
How People Feel About This Post

Lama Refurbishment Journey

How People Feel About Chapter 125 pilots reacted
View all 36 comments

It will be fun to watch…hope to meet you out should our schedules align.

Sign in to comment

Vario Baby Lama Build

How People Feel About Chapter 162 pilots reacted
View all 56 comments

Just ordered it up from Mark Smith 😃

Sign in to comment

Vario H145 1/6 conversion

I will use it as proof of concept for my next H135 1/6 build.
And currently rebuilding the tail for a SAB belt driven Fenestron conversion using the latest Vario 10 blade which is beautiful.
Pictures show the original configuration I discarded and currently converting to all SAB components at the rear.

How People Feel About This Post7 pilots reacted
View all 7 comments

Wow!! That is incredible! I had no idea that it was even possible to customize like that. Thank you for that insight and detailed explanation.

Sign in to comment

Fenestron building and flying the smaller 1/6 & 800 sizes

How People Feel About Chapter 16 pilots reacted
View all 2 comments

Fene's are tough cookies to get right. Tight tolerances and rotational speed limitations make for interesting adventures, especially at my altitude (6,000 feet). This is a great topic to cover.

Sign in to comment

Apache AH64 D

How People Feel About Chapter 124 pilots reacted
View all 38 comments

Yes it is. Always nice if your can cover the mechanics a bit. 😄

Sign in to comment