Latest in Scale Helicopters

Just finished 3D modeling the belt buckles for the Roban size Huey. With a little light green ribbon for belts these will look great.

I'm sharing the Blue Thunder project for a 500 engine with a brushless tail rotor.
The modeling process took me approximately two months. A friend did the 3D printing and assembly.

I've been thinking about a working miniature paint stencil. A 3D printer is the key to this. However, it needs to be printed very thinly, about 0.2mm. I then applied a spray adhesive to the back so that the paint doesn't bleed through it later.

A Roban head with some more details "Make it look real"

Designed for the Roban 700 AH64 Apache.

High detail Cobra cockpit made of 75 individual parts. I've designed 2 variations that fit Len Mount and Vario Cobras.

Wessex is almost done!

I have just completed a dummy turbine for the Lama in 1:6 scale. This can of course be supplied in any scale.
www.scale-print.de

Today I finished my trade fair model. An interior for a Vario Bell 429 on a scale of 1:5. You can probably see that I've been working with luxury interiors for the last 30 years in my previous job 🙂
The individual components can of course also be purchased separately.
www.scale-print.de

New in the program from today is the interior and equipment for the rear section of a rescue helicopter (in this case an H145 from Vario scale 1:5 in real scale 1:6). As always, all cushions are printed from rubber (TPU) by SCALE PRINT.
www.scale-print.de

Today I finally finished the work. Business Interior for the Vario Bell 429 in 1:5 scale.
www.scale-print.de

After I took a scan from the Vario Bell 429 on Saturday at Heli-Factory I have started to design the cockpit. The customer would like to have the business version including 5 seats in the back. To get it 100% scale the frames which are running in length direction needs to be positioned a little bit closer.
www.scale-print.de

For the Alouette III I have now constructed a winch. This can be made functional with a winch that must be mounted in the fuselage.
In addition, there are now many more parts for the Alouette III that I have designed which I will soon put online in my store.
www.scale.print.de

I have just completed the first cockpit for the 1:4 Jet Ranger. This is exactly tailored to the Vario model. For sure it will be availble in any other scale.
www.scale-print.de

The air filter on top of the dome is now also available for the Hughes 500
www.scale-print.de

3D printers: Asking the group for their current recommendations on 3D printers. I’m inching forward on getting one. I use Fusion360 on my mill. Can I assume Fusion360 will push out programming for most of them?

I added the 3,200 item to my store yesterday. Take a look at it. There is certainly something suitable for your model. If not just contact me.
www.scale-print.de

This is the result of the last 2,5 weeks.
Cockpits for: Alouette III 1/6,7, Alouette III 1/6, Lama 1/5, Bell UH-1D 1/6, EC 120 1/4, EC 130 1/4,5, A109 1/4,8. All cockpits are of course illuminated.
www.scale-print.de

www.scale-print.de
New in the program from today is the cockpit of the Alouette III. Of course available in any scale.
www.scale-print.de

New in the program. The sand filter for the Vario NH90 in scale 1:8,9.
www.scale-print.de

For the Starwood Lama (electric version) there is now also a dummy turbine on a scale of 1:5. At the request of a customer I have constructed a cover in the front area which completely covers the engine with the mounts.
www.scale-print.de

Installing new Fake-Tank and Tail Servo support.
Now the mechanic is well hidden

AS350 470 L size, full 3d printed

BELL-47 scale fuselage from LZK studio.
It is for Horizon blade-230s v1(v2).

I am Ken Luo from Guangzhou China, I built ch46 scale helicopter, it is successful, I am happy to share it with you here.
This is the vedio below:
1)
2)https://www.youtube.com/watch?v=ZMseFrgge5U&t=94s

Assembly turbine dummy kit for a 1/4 scale Alouette II and some more additional parts. The rubber hoses are still in the printer or will be measured by the customer after the first assembly of all parts but are also part of the kit.

Today I finished the cockpit for Volker Jung's K-Max 1200. Tomorrow it goes to the post office and if everything works out, we can see the nice piece next weekend in Belgium at the Francis Scalemeeting.
www.scale-print.de

The cockpit for Volker Jung's K-Max 1200 is now also almost finished. Only the ceiling panel is missing.
www.scale-print.de

As already announced, the carrier for various equipment for the Hughes 500 is now available in the store. The bracket is available individually or as a package with the Spectrolab and a FLIR.

Just finished up painting the prototype replacement rocket launcher ends. These little upgrades make a big difference. The before and after side by side.

Coming soon. Support on side for Spectrolab and FLIR for the Hughes 500
www.scale-print.de

The new AlQ144 TGM is working on for the Roban 700 size AH-1W cobra helicopter.

www.tylergraymodels.com

Today I finished the cockpit for the Blue Thunder from Heli-Factory. This time in scale 1/4. Unfortunately only the keyboard in front of the screen on the side table is missing.
www.scale-print.de

Cockpit for a Blue Thunder in scale 1/7.5. Ready for shipping.
www.scale-print.de

Today I have a new cockpit from the military version of the BO 105 in scale 1:4
www.scale-print.de

Cockpit for the EC 130 from Heli-Factory in scale 1/5.7. All 7 seats will fit into the heli :-). Looks a little bit like in a cinema.
www.scale-print.de

Vario Chinook

Hello,
Après plusieurs hélicoptères Vario (Bell230, Cobra, Lama, MD500E, Ecureuil) j'ai décidé de tester un modèle Roban.
J'ai choisi le UH-1D série 800.
Malgré que la qualité de soit pas au niveau de Vario on peut en sortir quelque chose de sympa après quelques modifications.
Photo avant et après modifications

I just finished a winch for a BK 117 in scale 1:7,6. Unfortunately, I had to make a few changes compared to the original because otherwise no stability would have been achieved.
www.scale-print.de

For all fans of the NH 90 there are now lots of add-on parts and there will be some more to come. I designed these for a customer in 1:4.6 scale, but the scan of the fuselage was originally from the Graupner NH90 in 1:8.9 scale, so all the parts will be available in that scale if needed.
www.scale-print.de

The first two cockpits for a BK 117 in 1:7,6 scale (for www.scale-helikopter-service.com ) now finished. Instruments are backlit as in almost all of my cockpits and the seat pads are printed in rubber (TPU) using the laser sintering process.
www.scale-print.de

I still have one for today. Lama Cockpit 1:4 also with backlit instruments.
www.scale-print.de

Available from today in my store. Cockpit and accessories for the BK 117. Designed in 1:7.6 scale but as with all my items, of course available in any other printable scale on request.
www.scale-print.de

I have just finished a business pilot seat for the Bell 429 in 1:3,5 scale. The upholstery is printed from rubber as usual. The rails are recessed into the floor like the original.
www.scale-print.de

Here is a cockpit for a Vario Hughes 500D in 1/4 (Vario Catalogue 1/5) scale. The seats have the appropriate cut outs for the PHT3. The instruments are of course backlit.
www.scale-print.de

I just assembled a wiper for the H145 in scale 1/4.8. The wiper lip is of course printed from rubber and glued on after painting.
www.scale-print.de

Now the cockpit for the 1:4.8 scale AS 656 Panther from Heli-Factory is ready for delivery. However, the pitch and control sticks are still missing.
www.scale-print.de

Sikorsky S 92

After many hours of work I arrived at the final model. almost 2 meters long. in this case the printed model will be used as a mold to make a fiberglass copy

customer video

The cockpits for the MilMi 24 from Heliclassics are now finished and I will hand them over this weekend. There are a total of 25 white LED's for backlighting and 28 LED's in different colors in the front panels. The instrument rings are individually printed and insert after painting the panels turquoise. The seat cushions are printed in rubber (TPU) as usual.

Today we had a try-on at SCALE PRINT. the turbine cover for the Vario Lama with a Jakadowsky turbine. Some small adjustments need to be done but at least everything fits well. One straight Festo connector needs to be exchanged with a 90° connector. The 3D printed rubber pipes which are included in the set were not installed today. Available in some days by www.scale-print.de

Last week I delivered a cockpit for BO105 in scale 1:4 from Heli-Factory. Cockpit and seats are copied from the original at the request of the customer. The rear seat I will make next, I'm still waiting for the original pictures.
For further information please send me a PM.

For the end of this year I made one more part for the Roban fans. This is the step framing for the 700 Bell 429 (scale 1:7). It will be installed as the original one with foru brackets underneath the fuselage.
For more infos please send a PM