Latest in All

Hello, I have 3 Vario scale helicopters. Since retirement, I can no longer afford the prices Vario is asking for their scale kits. I have had Roban before and was not fond of their kits, quality and virtually no part support! Does anyone know if their quality has improved? I had the AS 350 which ate belts and chewed up gears. I also had the 700 cobra which the gel coating on the outside started to peel off. Has anyone else had these problems? I want another cobra but have no idea if their quality has improved drastically.
Any tips would be greatly appreciated
Mike

…Coming soon from XXL Helicopter…
206L V2

This helicopter in kit form will be available and ready for pre orders very soon. The kit is primarily designed in the electric version for the experienced builder. Turbine version would be special order after customer consultation. It has been upgraded with improvements since version one was introduced many years ago. The 407 will be available next since it shares parts of the same mold. For more info use below email link.

For USA info@heliworkshop.com
Europe helifantenmaus@aol.com

Scale 1/3.5
Rotor 3.3 meter
20 mm main shaft
Scale rotor head
Semi scale tail rotor
Scale exterior parts included
Electric dome mechanics
Functional doors
Removable tail boom, less than 5 minutes, no tools needed

Check out the video of a version 1 from several years ago

Hi all. I am new to ScaleHeliPilot. I have recently bought the Vario Chinook 1:11 and I'm done with the mechanics. Fuselage up next. I have never cut fiberglass before so I am petrified :)

Other than some old RC scale cars (eg Tamiya) I have done in the past, this is my first journey into the world of Scale.

I noted that Michael Kranitz suggested a step bit for the 30mm landing gear holes. I am curious though about the larger circular cutouts for the rotors. The instructions suggest 75mm and 90mm diameters for those. What is the best way to go about it? A dremel would work but it is difficult cut perfect circles with a rotary. I could look at a hole saw, but I'm worried that it might rip the fiberglass.

Curious to hear what other people did.

My second question is about sliding the mechanics in and out of the fuse. I saw Michael warned that one needs to be ready to do this a lot. It seems quite an involved process. Removal of the front rotor (and re-application of loctite after reinsertion?) And I guess the landing gear must also be unscrewed from the mechanics every single time? Is accessing the front landing gear not a pain? Because I assume the landing gear struts must remain in the fuse after the mechanics slide out.

I'll probably have many more questions as this proceeds. Looking forward to some great discussions here.

How frustrating is it to need a part only to be told you have to wait weeks or months to get it? Like you, I hate that, which is why Heliworkshop stocks THOUSANDS of parts so you don’t have to wait at a critical point in your build or repair.

At Heliworkshop, we are the only “stocking” Vario dealer in the USA with a strong emphasis on getting the parts or kits you need as soon as possible. Vario has a 5000+ parts inventory. Although it is impossible to maintain all 5000+ parts in our stock, we do our best to fill orders and ship in stock parts within 24 hours. If we don’t have the parts you need in stock, we simply add them to our weekly orders that ship from the German warehouse. Either way, we are always working to make sure you get what you need quickly.

Next time you think about kits, parts, service or just critical help with your Vario model, remember that we are builders with more than 30 years of experience building and flying Vario and other brands of model helicopters. We know what you need because we’ve been there!

Military nomenclature stencils..

I had been searching for a company that could produce custom stencils in a very small scale that would work on models from 1/7 - 1/4 I finally found a company that was able to produce them. These are made from Mylar and are reusable. The price was quoted based on the quantity and I got 14 different ones which was about 110.00$ including shipping. These will work great on some military models we’re working on.